Most of the vehicles on the road operate with a timing belt which needs to be replaced at certain increments just as the serpentine belt needs to be replaced. If a timing belt breaks on an interference engine you can almost guarantee the engine will be ruined. When you come to Bay’s Complete Auto Repair and Salon, we will let you know when it is time to replace the timing belt.
A timing belt is a large belt much like the smaller serpentine belt, that synchronizes the rotation of the crankshaft and the camshaft(s) so that the engine’s valves open and close at the proper times during each cylinder’s intake and exhaust strokes. The timing belt also regulates the power steering and the water pump. This timing is crucial to an engine operating properly. If not replaced perfectly to specifications, you risk damaging the motor. Often this is the best time to replace the water pump if it is near the timing belt otherwise you will be paying the labor again to replace it when it goes bad.
The process for replacing your timing belt is timely as it often requires removing the serpentine belt and all the components involved with it. Then removing the timing belt cover and then replacing all the timing components such as idler pulleys, guides and tensioners. Also, a good time to replace the water pump even if it shows no signs of failure.
The timing belt is a costly job, so if you don’t replace it and it breaks you could be looking at purchasing a new motor.
The manufacturer has tested the timing belt and knows when it will typically break. Always use the manufacturer’s recommended mileage for replacement. Also, when the timing belt is replaced the mechanic typically puts a sticker somewhere under the hood that indicates the mileage and date of change out. Symptoms that a timing belt needs to be changed are squeaking noises that come from the timing cover area. Usually a mechanic can spend 30-45 minutes and gain sight to the belt to see what shape it is in. If this belt breaks your vehicle will not start and very well could be damaged permanently.
No, unless you are a trained mechanic comfortable with taking on the task. Timing belt jobs are one of the more difficult jobs to perform with a lot of risk to damage the motor if not done properly.